Aluminum Fence Installation Houston, TX

Aluminum fits when you want a fence you stop thinking about. It is the right choice if you have rebuilt or restained a fence more than once, if your fence line stays wet, or if the fence is part of a larger outdoor project and should last as long as the patio and walls beside it.

Aluminum is our main fence system. If you are replacing one of the materials below, aluminum gives you a similar look without the same upkeep.

• Wood fences rotting at the base or graying within a few years
• Steel or iron fences bleeding rust onto concrete and needing repainting
• Vinyl panels that sagged, yellowed, or cracked in the sun
• New construction where you want to fence once and be done
• Fence lines near pools, sprinklers, or bayou-adjacent ground that stays damp

6063 is an aluminum alloy used for architectural extrusions, and T6 is a heat treatment that gives it strength and stiffness. In plain terms, it is a structural grade of aluminum, not the thin stamped material found on cheap ornamental fences.

Aluminum forms its own protective oxide layer, so it does not rust the way steel does, and the powder-coated finish on top protects the color from UV. It does not absorb water, so it does not swell in humid weeks or shrink in dry ones. It is also non-combustible, and the system carries an ASTM E84 Class A fire rating, a real difference from wood when a grill or fire pit sits near the line.

Dark finishes will get warm in August sun, like any dark surface. The difference is that aluminum keeps its shape at the temperatures Houston actually reaches, where vinyl can soften and bow.

The steps below take you from first visit to final latch check.

1. 1Site visit by a Home Scout to measure the line, review grade and drainage, and talk through style and gate needs.
2. 2A fence plan showing post layout, gate swings, height, and finish, ready for HOA submission when needed.
3. 3Utility locates through 811, then removal of the old fence and its footingsFootingThe widened base at the bottom of a wall, column or structure that spreads its load into the ground..
4. 4Post holes dug into the clay and posts set in concrete, checked for plumb and spacing, with the concrete crowned to shed water.
5. 5Panels cut to fit on site and locked into the posts, with grade changes stepped or followed.
6. 6Gates hung, hardware adjusted for smooth latching, and the work area cleaned up.

Privacy styles use tongue-and-groove panels that close every gap. Woodgrain finishes give you the look of stained horizontal boards on a material that never needs stain. Matte black architectural styles suit modern homes and pair well with black window frames, metal roofs, and dark pergolaPergolaAn open overhead structure of posts and beams that frames a space and supports shade or climbing plants. Smaller cousins include the arbor (an arch over a path or gate) and the trellis (a lattice panel for climbers). posts.

Because the system is modular, you can use more than one style on a property: a full privacy run where the yard backs up to a road or neighbor, and a matching finish on gates and shorter sections near the house. Color can be coordinated with an aluminum pergola installation so the structures in the yard look like they belong together.

The main drivers are linear footage, fence height, style and finish, and the number and width of gates. Corner posts, grade changes that require stepping, and runs that turn often add materials and labor.

Site conditions matter as well: removing an old fence and its footings, digging around live oak roots, hitting buried concrete or debris, and narrow access. Compare aluminum against wood on lifetime cost rather than install price, since the aluminum fence needs no staining, sealing, or board replacement. Use the ballpark price tool for a range.

Most fences we replace failed in the ground before they failed above it. Posts set in shallow holes, or in concrete that traps water around the post, move as the clay swells and shrinks. Once a post tilts, the panels rack and the gate stops latching.

Gates are the other weak point. A heavy gate hung on a standard post sags within a year, drags on the ground, and stops closing on its own. We set gate posts with extra care and use hardware matched to the gate width, so it swings and latches cleanly for the long haul.

A fence is one of the largest visual elements in a yard, so it works best when it is planned with the rest of the space. Many of our fence projects are part of backyard landscaping, patio paver installation, or landscape lighting installation along the fence line.

If complete screening from neighbors is the main goal, read about our privacy fence installation. You can also see all of our fence contractor work in Houston or browse our portfolio of outdoor projects.

We are a certified SleekFence installer, and the SleekFence finish carries a 20-year warranty. A Home Scout visits your property before writing a proposal, and one crew handles demolition, posts, panels, gates, and any drainage or landscape work around the fence.

We have served Houston and the surrounding metro since 2016. You get an itemized written proposal, our price-what-we-quote guarantee, and a 72-hour post-completion walkthrough. The discovery call is free, and the on-site consultation has a $150 work scope fee that is credited to the project if you move forward.